KLOD-01 – fire retardant impregnation
1. FIELD OF APPLICATION AND PROPERTIES
Fire retardant impregnation "Klod-01" represents a water solution of non-organic salts, used for treatment of wood, wooden materials and plywoods, operated inside of buildings and premises. Fire reatardant impregnation "Klod-01" consists of 2 solutions: "Klod-01-1" and "Klod-01-2".
2. NORMATIVE AND TECHNICAL REQUIREMENTS
Fire retardant impregnation "Klod-01" corresponds to I group of fire-proof efficiency according to the fire safety requirements stated in NPB 251-98 "Fire-proof materials for wood and wooden based materials. General requirements. Method of testing."
Certificate of fire safety No. SSPB.RU.OP.002.B.02055
Certificate of conformity No. ROSS RU.BB05.N00949
Hygiene certificate No. 77.01.12.238.P.042877.10.05
3. TECHNICAL SPECIFICATION
|
Klod-01-1
|
Klod-01-2
|
Color of solution
| transparent |
transparent
|
pH
| 2,2 |
7,8
|
Density, not more, kg/m3
| 1,1 |
1,2
|
Total consumption of solutions, not less, g/m2
| 550 |
550
|
4. SURFACE TREATMENT
Coating should be applied on clean and dry surface. Dust and dirt should be removed from the surface by means of wet rags, grease and oil stains can be removed with solvent (solvent ¹ 646 is recommended). If application of solvent is not possible use the washing agents.
5. APPLICATION
Application conditions:
Ambient temperature - not less than +5 °Ñ;
Relative air humidity - not more than 85 %;
Humidity of wood - not more than 15%.
Application modes:
Application is performed by means of high pressure machines, spray gun or brush in three passes: first - application of "Klod-01-1" with consumption 250 g/m2. "Klod-01-2" is applied 2-4 hours later in two passes with consumption 300 g/m2.
Cleaning of tools:
Wash the tools with water immediately after end of work.
6. OPERATING CONDITIONS
Operation of coating in enclosed premises without direct ingress of drop moisture.
Operation time of coating based on "Klod-01" not less than 3 years.
7. PACKAGING AND STORING
Fire retardant impregnation "Klod-01" is supplied in packaging of 10 l. and 20 l.
Shelf life in the packaging of manufacturer - 1 year in dry place at temperature above +50Ñ.
ATTIK – fire- bio retardant impregnating composition
TU 2389-021-40366225-00
1. FIELD OF APPLICATION AND PROPERTIES
Fire- bio retardant impregnating composition "Attik" represents a solution of non-toxic non-organic salts. Coating based on "Attik" is used for protection of wooden constructions and wooden based materials, operated inside of the buildings and premises, from ignition and spreading of flame.
2. NORMATIVE AND TECHNICAL REQUIREMENTS
Fire retardant impregnating solution "Attik" corresponds to I group of fire-proof efficiency according to the fire safety requirements stated in NPB 251-98 "Fire-proof materials for wood and wooden based materials. General requirements. Method of testing." and GOST 16363-98 "Fire-proofing means for wood. Methods of determination of fire-proof properties".
Certificate of fire safety ¹ SSPB.RU.OP.063.B.00003
Certificate of conformity ¹ SSAQ 006.1.4.284
Hygiene certificate ¹ 77.01.03.238.P.20016.09.4
3. TECHNICAL SPECIFICATION
Color
| transparent |
pH
| 7,5-8,0 |
Consumption for I group, not less, g/m2
| 750 |
Consumption for I group, not less, g/m2
| 400 |
4. SURFACE TREATMENT
Coating should be applied on clean and dry surface. Dust and dirt should be removed from the surface by means of wet rags, grease and oil stains can be removed with solvent (solvent ¹ 646 is recommended). If humidity is high - use seasoning or force drying (using heating machines).
5. APPLICATION
Application conditions:
Ambient temperature - not less than +5 °Ñ;
Relative air humidity - not more than 85 %;
Humidity of wood - not more than 15%.
Application modes:
Application is performed mechanically by means of machines or manually. Application is performed layer-by-layer. Apply 300-400 g/m2 in one pass. Interlayer curing - 2-4 hours depending on temperature and humidity. Disassembled constructions can be coated using immersion method. Immers construction elements into a bath with impregnation, heated up to +60 C, and keep elements inside within 20-30 minutes. Injection depth makes 2-8 mm, depending on the mode of application.
Cleaning of tools:
Wash the tools with water immediately after end of work.
6. OPERATING CONDITIONS
Operation of coating in enclosed premises without direct ingress of drop moisture.
Operation time of coating is not less than 3 years.
7. PACKAGING AND STORING
Fire- bio retardant impregnation "Attik" is supplied in packaging of 10 l. and 20 l. Product also can be delivered in dry form.
Shelf life in the packaging of manufacturer - 1 year in dry place at temperature above +50Ñ.
|